Volvo reports increased interest in gas as alternative to diesel for heavy-trucks

September 23, 2020

Volvo Trucks has seen a real push towards gas-powered vehicles across Europe (Courtesy Volvo Trucks)

Volvo Trucks, headquartered in Göteborg, Sweden, reports that it is seeing hauliers and transport buyers increasingly move towards refrigerated liquefied gas, as a cheaper and more environmentally friendly alternative to diesel.

With the EU Green Deal indicating the direction the transport industry needs to take towards a cleaner future, it means that there must be an end date for fossil fuels, states Volvo Trucks.

In order to meet those demands, the new Volvo FH and Volvo FM trucks will have engines that run on liquefied natural gas (LNG) and biogas, which offer the same high performance as diesel engines, but produce significantly lower CO2 emissions.

“Today, LNG-fuelled trucks are the most commercially viable alternative to ordinary diesel for heavy long-haul operations. This fuel is available in sufficiently large quantities and at a competitive price. Using more gas trucks creates favourable conditions for making a transition to a larger share of liquefied biogas over time,” stated Lars Mårtensson, Director of Environment and Innovation at Volvo Trucks.

Using liquefied biogas, also known as Bio-LNG, reduces net emissions by up to 100% from tank to wheel (TTW), while using natural gas cuts emissions by around 20% TTW compared with ordinary European standard diesel.

The production of fossil-free biogas requires a greater number of production plants for anaerobic digestion of waste, with the possibility of cooling the gas into liquid form. Various studies have calculated that just over 20% of diesel in Europe could be replaced by renewable gas in the form of Bio-LNG by 2030.

The number of liquefied gas filling stations is constantly increasing and is already an alternative to diesel on many routes. However, the number of filling stations needs to continue expanding in pace with a corresponding growth in the number of gas-powered trucks.

“By investing in LNG trucks, we are showing that Bio-LNG is an important alternative to reduce dependency on fossil diesel. However, to speed up the transition to climate-neutral transport, it is necessary to continue investing in liquefied gas filling stations and carrying out measures to make it easier for hauliers to invest in heavy gas-powered vehicles,” Mårtensson highlighted.

Because no individual energy carrier is capable of meeting all the challenges related to climate change, different types of fuels and drivelines will continue to co-exist for the foreseeable future, states Volvo Trucks.

“Embracing new technology will be the key to achieving climate neutrality. The share of LNG trucks will gradually increase in Europe. But gas trucks won’t be able to meet all transport challenges. Electromobility will play an important role locally, as well as regionally going forward, and the development of batteries and charging infrastructure will be important factors in its expansion,” explained Mårtensson.

Electromobility using hydrogen fuel cells has potential to reduce the need for batteries in long-haul transport in the longer term, it was stated.

“Although promising developments have been made in hydrogen fuel cell technology, there are still practical and financial obstacles to overcome before it can provide significant climate benefits in heavy-duty transport,” added Mårtensson.

Despite all the technical advances in electromobility, ongoing improvement of the efficiency of combustion engines will continue to play a key role in reducing climate impact for many years to come.

“A lot can already be done to reduce climate impact with today’s engines. For instance, both new and older diesel trucks from Volvo can run on HVO, a biofuel producing very low net CO2 emissions. The challenge is that the availability of biofuels continues to be so limited,” Mårtensson concluded.

www.volvotrucks.com

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • “Scrap is the new gold” and other hardmetal and hard materials insights from Euro PM2023 Congress, Lisbon
  • IperionX: A Powder Metallurgy route to lower-cost recycled titanium plate, billet, bar and preforms with reduced CO2 emissions
  • A review of the sintering of iron-copper-carbon alloys for structural Powder Metallurgy applications

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link