UK hub for advanced powder processes launches

News
February 7, 2017

February 7, 2017

MAPP, the EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes, is a £20m research hub led by the University of Sheffield, UK. The hub brings together expertise from the Universities of Sheffield, Leeds, Manchester, Oxford, and Imperial College London, together with 17 industry partners and the UK’s High Value Manufacturing Catapult.

The aim of MAPP is to realise the potential of advanced powder processes to provide low energy, low cost and low waste high value manufacturing routes and products to secure UK manufacturing productivity and growth.

The launch event on January 31st in Sheffield, UK, was attended by 150 delegates from across industry, universities, Catapult centres and sponsors. MAPP Director and RAEng Chair Professor Iain Todd, gave an overview of MAPP’s vision and how MAPP aims to address the challenges and opportunities surrounding advanced powder processes through an ambitious interdisciplinary research programme.

“It’s an exciting time for powder based processes with new opportunities opening up rapidly in a range of key sectors including aerospace, energy, automotive and healthcare. However, there are still some fundamental scientific issues to be addressed before these technologies can be adopted more widely,” stated Todd.

“MAPP brings together leading UK researchers, industry and the High Value Manufacturing Catapult to achieve right first time manufacturing for advanced powder processes and develop the next generation of manufacturing technologies. The EPSRC Future Manufacturing Hubs are key element in our approach to tackling the UK’s productivity gap and solving some of the longer term challenges faced by the UK’s manufacturing industry,” added Todd.

Presentations from MAPP’s academic partners highlighted how leading edge research is being applied to provide new insights on advanced powder processes and how this new understanding is leading to improved outcomes for UK manufacturing.

Professor Peter Lee, from the University of Manchester and the Research Complex at Harwell, spoke about how experiments at the UK’s Diamond Light Source are providing new information on the fundamental physics and chemistry of technologies such as Additive Manufacturing. Professor Andrew Bayly, from the University of Leeds, discussed how physical models can give a better understanding of the dynamic behaviour of powders in processes and some of the challenges associated with powder processing.

Presentations from MAPP’s industry partners outlined the opportunities for advanced powder processes, some of the challenges which need to be overcome, and how the research in MAPP, together with aligned programmes funded by industry and UK Government, are overcoming the challenges and delivering benefit for UK productivity and growth. Dr Alison Wagland, Technology Manager at Johnson Matthey, spoke about the use of powders in the production of catalysts for emission control and batteries for energy storage. Dr Rob Sharman, Global Head of Additive Manufacturing at GKN Aerospace, highlighted the opportunities for metal Additive Manufacturing in aerospace and the need to design new materials and powders which were tailored specifically for these new processes. Dr Phil Carroll, Chief Executive Officer at LPW Technology, spoke about the need to understand manufacturing from the perspective of the powder and the need for quality, traceability and consistency of powder materials.

“We’ve developed a strong vision and plan for MAPP together with our industry, academic and Catapult partners. Today has given us the opportunity to share our vision and plans for MAPP with a wider network so we can start to develop new opportunities for collaboration. The breadth of sectors attending and the feedback we’ve received demonstrates the appetite and need for MAPP,” stated Dr Richard France, Senior Business Development Manager at MAPP.

www.mapp.ac.uk

News
February 7, 2017

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • Powder Metallurgy: Discover innovative technologies meeting the demands of vehicle electrification
  • Gevorkyan a.s.: Europe’s fast-growing Powder Metallurgy company achieving success through a diversified customer base
  • Powder Metallurgy in Asia: A status update from the World PM2024 Congress, Yokohama

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link