Wickert introduces multifunctional gripper for multi-layer components

May 4, 2021

With the help of cameras and an image processing system, the multifunctional gripper detects both the inside diameter and position of components (Courtesy Wickert Maschinenbau GmbH)

Wickert Maschinenbau GmbH, Laundau, German, has developed a compact, setup-free, multifunctional gripper for the handling of multilayer-stacked or chaotically-deposited components with layer separation. Due to its flexibility, the multifunctional gripper is suited to a variety of different applications throughout handling, automation and machining operations.

The system is able to decide on the suitability of workpieces for further processing, via a plausibility check, and components that are unsuitable or falsely gripped are detected and do not undergo further processing.

The gripper utilises two to six fingers with variable lift ranges to pick up workpieces and lift them out of the transport container. As soon as one layer has been completely emptied, the separation sheet is removed by three close-fitting, extendable vacuum suction elements on the gripper arm. The system is then able to access the next level of components.

The multifunctional gripper can be used without additional programming: the diameter of the gripped component is permanently monitored by a position sensor system and the PLC compares this value with the gripper diameter, which also has a tolerance range configured in a ‘recipe’ stored centrally in the PLC.

The system is available with two different gripper types: A group of two to six fingers picks up workpieces and lifts them out of the transport container (on left). As soon as a batch is completely empty, the layer separation sheet is removed by means of three vacuum suction elements also attached to the gripper arm. The system is then able to access the next level of components (Courtesy Wickert Maschinenbau GmbH)

The standard version of the gripper arm has a height of 730 mm and, with a diameter of just 160 mm, the gripper is still able to precisely pick and place small components even when they are tightly packed on a pallet, or located in the corners of pallets. If a workpiece has slipped into a position that is not accessible to the gripper, the fingers are able to move it back into a position where it can be reached.

The surfaces which come into contact with the parts needed to be gripped are equipped with a wear-resistant rubber coating which ensures a high friction value. In accordance with individual requirements, the gripper pressure can be set individually to a value between 460 N and 3000 N, aiding in safe grips on both heavy and light, delicate components. As an option, the gripper fingers can also be fitted with an interlocking under-grip.

In the standard version, the gripper is designed for rotation-symmetrical workpieces with inside diameters from 40 mm to 256 mm and weights from 100 g to 20 kg. For other requirements, the parameters can be configured individually. Grippers with larger arms, for combined outside and inside gripping, are also available.

With the use of cameras, image processing and an integrated position sensor system, the gripper detects both the inside diameter and position of components. It also monitors the remaining quantities and detects when a layer of components is empty.


Latest Industry News

Download the latest issue of PM Review

Our latest issue is now available to download in PDF format, free of charge.

As well as an extensive Powder Metallurgy industry news section, this 92-page issue includes the following exclusive articles and reports:

  • The state of Germany’s Powder Metallurgy industry: From the coronavirus pandemic to the EV revolution
  • CM Furnaces: A stalwart of the industrial furnace segment reflects on seventy-five years of thermal processing innovation
  • Liberty Powder Metals: The Liberty Steel spin-out targeting high-quality metal powder production for advanced manufacturing processes
  • The Low Gas Consumption continuous furnace: Delivering increased efficiency across a range of PM applications
  • Eliminating conflict minerals: A new standard for the assurance of conflict-free materials across the supply chain
  • More information

Industry News


Sign up to our free e-newsletter, sent weekly to industry professionals around the world. We'll also let you know each time a new issue of PM Review magazine is available.

Subscribe for a FREE digital magazine

PM Review is the leading international magazine for the Powder Metallurgy industry.
Published four times a year, it is available as a free download or through a print subscription

Connect with us

Powder Metallurgy: The original net-shape production process

Powder Metallurgy components are relied upon by a wide variety of manufacturing industries, from automotive to power tools, household appliances, chemical engineering, filtration and more.

The main reason for the technology’s success is its cost-effectiveness at producing high volumes of net-shape components, combined with its ability to allow the manufacture of products that, because of the production processes, simply cannot be manufactured by other methods.

To discover more about how the technology has revolutionised component production, browse our Introduction to Powder Metallurgy.

Latest industry news

Copy link