Scientists engineer bacteria to extract rare earths

November 23, 2021

A lab-grown crystal of a synthetic form of the rare earth mineral, monazite, shows extensive damage to one face after exposure to bio-leaching compound generated by Gluconobacter oxydans (Courtesy Cornell University)

A study recently published in Nature Communications, ‘Generation of a Gluconobacter oxydans knockout collection for improved extraction of rare earth elements’, has described the use of genetically engineered micro-organisms to process rare earth elements (REE) in a way which is sustainable, efficient and cost effective. The paper was written by Alexa M Schmitz, Brooke Pian, Sean Medin, Matthew C Reid, Mingming Wu, Esteban Gazel and Buz Barstow, researchers at Cornell University, Ithaca, New York, USA.

The demand for REEs is growing, as applications such as wind power generation, electric mobility, and communications technology continue to increase. In the US alone, annual REE needs amount to approximately 10,000 kg, which is extracted from 71.5 million tonnes of raw ore.

Currently, separating the rare earth elements is usually done by dissolving rock with hot sulphuric acid, followed by the use of solvents. The authors of this paper sought to create a micro-organism that does the job succinctly by leveraging the gram-negative bacterium G. oxydans, which produces an acid called biolixiviant which dissolves rock. On its own, the bacterium uses this acid to pull phosphates from rare earth elements; the research team have begun to manipulate the bacterium’s genes so it can extract elements with even more efficiency.

The researchers used ‘Knockout Sudoku’, a technology which allowed them to disable G. oxydans‘ 2,733 genes one by one. This enabled the curation of mutants with specific genes removed, allowing the identification of the specific genes which support the bacterium’s ability to separate elements from rock.

Schmitz identified two such relevant genes: one which accelerates acidification, and one which stops it. This allowed the team to create a mutant which doesn’t regulate its production of biolixiviant, the dissolving acid at the core of the bacterium’s use potential.

In the study, Gazel’s lab at the Department of Earth and Atmospheric Sciences at Cornell helped develop mass spectrometry techniques to measure concentrations of REEs from solutions where mutants were exposed to the ore. According to Gazel, some mutants were seen to gather very high REE concentrations.

Now, the team is working to regulate the gene that accelerates acid production, in an effort to create a system wherein mutated G. oxydans run on cellulose-derived sugars for energy.

“I am incredibly optimistic,” stated Gazel, co-author of the article. “We have a process here that is going to be more efficient than anything that was done before.”

www.cornell.edu

Latest Industry News

Download the latest issue of PM Review

Our latest issue is now available to download in PDF format, free of charge.

As well as an extensive Powder Metallurgy industry news section, this 120-page issue includes the following exclusive articles and reports:

  • Tesla teardown: Identifying potential uses for PM in electric vehicle transmissions
  • Can European research still claim to be ‘world class’? Prof José M Torralba on the changed PM research base
  • How to make metal powders. Part 1: An introduction to atomisation, process fundamentals and powder characteristics
  • Starting out in powder production: The story of Fomas Group’s Mimete metal powder business
  • The creation of a Powder Metallurgy market leader: China’s NBTM New Materials Group Co., Ltd.
  • Tungsten heavy alloys: An exploration of how key property combinations enable better mechanical performance
  • Pharmaceuticals and PM are closer than you think: A new approach to understanding powder compaction and tablet characterisation
  • More information

Industry News

E-newsletter

Sign up to our free e-newsletter, sent weekly to industry professionals around the world. We'll also let you know each time a new issue of PM Review magazine is available.

Subscribe for a FREE digital magazine

PM Review is the leading international magazine for the Powder Metallurgy industry.
Published four times a year, it is available as a free download or through a print subscription

Connect with us

Powder Metallurgy: The original net-shape production process

Powder Metallurgy components are relied upon by a wide variety of manufacturing industries, from automotive to power tools, household appliances, chemical engineering, filtration and more.

The main reason for the technology’s success is its cost-effectiveness at producing high volumes of net-shape components, combined with its ability to allow the manufacture of products that, because of the production processes, simply cannot be manufactured by other methods.

To discover more about how the technology has revolutionised component production, browse our Introduction to Powder Metallurgy.

Latest industry news

Copy link