Researchers assess powder quality with triboelectric charging concept

July 22, 2024

GranuCharge measurement of (a) initial charge and (b) final charge with modification (As published in ‘A method to assess the quality of Additive Manufacturing metal powders using the triboelectric charging concept,’
GranuCharge measurement of (a) initial charge and (b) final charge with modification (As published in ‘A method to assess the quality of Additive Manufacturing metal powders using the triboelectric charging concept,’

Researchers from McGill University, Montreal, Canada, have demonstrated a new method of assessing the quality of metal powders for Additive Manufacturing using a triboelectric charging concept on using CpTi, Ti6Al4V, AlSi10Mg, IN 738, and SS 316L powders. The results were published in Scientific Reports.

In many Additive Manufacturing processes based around powder beds, such as Laser Beam Powder Bed Fusion (PBF-LB) and Binder Jetting (BJT), the quality of the spread layer – characterised by its continuity, uniformity, and packing density – must be maximised to reduce surface defects and porosity in the resultant components, .

Under the scope of ‘A method to assess the quality of Additive Manufacturing metal powders using the triboelectric charging concept,’ the authors introduced a new methodology for triboelectric charging. Modifications introduced to the GranuCharge setup included an electronic flow rate measuring tool to assess tribocharging as a function of flow rate were noted as successful.

THE WORLD OF POWDER METALLURGY TO YOUR INBOX
Subscribe to our weekly newsletter
Sign up

The authors propose to measure the tribocharging behaviour at several flow rates instead of just one, because some flow rates may not indicate significant variation between two indistinguishable yet dissimilar powders, while other flow rates do. Minor variation of powder’s surface chemistry has proved to have affected the tribocharging response of the metal powders; tribocharging behaviour may not be the same even with powders having the same passivation oxide (e.g. CpTi and Ti6Al4V). The presence of negligible amounts of extra oxide, such as Al2O3, can cause considerable variation in powder tribocharging behaviour. Even a small amount of water produced a significant deviation from the expected tribocharging behaviour.

Recognising the degree of influence of moisture to the triboelectric behaviour of AM powders is paramount to assess the degradation of powder quality, explained the authors. Hence, further studies on the interaction of moisture with AM powders and how it affects their tribocharging response are recommended.

The authors have stated their intentions to evaluate other powder systems than the ones studied in this work and expand the database of tribocharging constants for AM powders, which could open the gate to use the technique to identify surface states by the tribocharging constants knowledge as an alternative to analytical techniques like XPS.

The full article is available here.

www.mcgill.ca

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • Powder Metallurgy: Discover innovative technologies meeting the demands of vehicle electrification
  • Gevorkyan a.s.: Europe’s fast-growing Powder Metallurgy company achieving success through a diversified customer base
  • Powder Metallurgy in Asia: A status update from the World PM2024 Congress, Yokohama

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link