QuesTek awarded $1.1 million for development of corrosion-resistant cold sprayable molybdenum alloys

May 18, 2021

QuesTek Innovations LLC, Evanston, Illinois, USA, has announced that it was awarded $1.1 million in Small Business Innovation Research (SBIR) Phase II funding from the US Department of Energy. The funding will be used to design, develop and qualify a novel materials solution and process for next-generation molten salt reactors. The Phase II project will focus on efficient, cost-effective cold spray processing of bimetallic structures, with refractory-based alloys (e.g., molybdenum) as a surface layer to provide corrosion resistance and high-temperature stability on the surface of structural materials certified by the ASME (American Society of Mechanical Engineers).

Dr Pin Lu, QuesTek Materials Design Engineer and the project’s Principal Investigator, stated, “Cold spray is one of the most effective and economical coating technologies to greatly extend the lifetime of next-generation nuclear reactors. We are excited for this opportunity to apply our proven computational materials design approach to design novel high performance cold sprayable refractory materials, improving the economic feasibility and performance of future clean energy.”

During the Phase I project, QuesTek used its Integrated Computational Materials Engineering (ICME) technologies to design novel molybdenum alloy compositions which combine improved cold spray processability with high molten salt corrosion resistance and strong interfacial bonding to the substrate material. Initial cold spray trials successfully deposited these compositions on 316 stainless steel. QuesTek plans to explore additional refractory alloy designs beyond molybdenum (niobium, tungsten, tantalum, etc.) and more extensive functionally graded, cold spray structure evaluations that will focus on both the material and the process, as well as address scale-up considerations.

QuesTek is partnering with Solvus Global, a leader in advanced cold spray technology process optimisation, AM powder development and commercialisation, and machine learning process control, as well as Professor Vilupanur Ravi at Cal Poly Pomona, an expert in materials behaviour in molten salt, to achieve concurrent design of both material and process.

“Further development of functionally graded coatings applied via cold spray will augment the commercialisation of critical technologies,” commented Dr Aaron Birt, Solvus Global co-founder and CEO. “This project team combines all the key facets needed to successfully transfer a materials solution out of the lab and into industry, from modelling to production scale up. We look forward to continued project involvement and we are ready to deliver this materials solution at scale to the nuclear industry.”

Cal Poly Pomona Professor Ravi added, “This project covers the full gamut: materials design, novel coatings development, and environmental stability. We are delighted to have the opportunity to evaluate the stability of these novel coatings in molten salt environments through innovative and careful testing protocols accompanied by detailed characterisation.”

This research supports the Department of Energy clean energy initiative of enabling more efficient electricity generation. Current ASME code-approved materials for metallic nuclear molten salt reactors have adequate temperature and oxidation resistance, but lack the required corrosion resistance. As reactors are designed to push efficiency limits, novel materials and processes – such as those being developed by QuesTek – are necessary to also function in highly-corrosive environments.

www.questek.com

www.solvusglobal.com

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • Phoenix Sintered Metals: A story of transformation, growth and community from America’s PM heartland
  • World PM2024 Yokohama: The stage is set for the PM industry to find a path to sustainable growth
  • The state of Europe’s hard magnets industry and the challenge of optimising the mass production of Nd2Fe14B permanent magnets

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link