Proposed cobalt reclassification raises concerns for metal powder users

News
October 18, 2017

October 18, 2017

It is anticipated that the January 2017 proposal for the EU Harmonised Classification of cobalt metal as a carcinogen, mutagen and reproductive toxicant will have significant ramifications for the metal powder processing industries, including Powder Metallurgy, Additive Manufacturing and Metal Injection Moulding.

During a keynote presentation at the EPMA’s European Hard Materials Group (EuroHM) open meeting, held during the 19th Plansee Seminar in Reutte, Austria,at the end of May 2017, Tuulia Svanehav of Sandvik Machining Solutions, Sweden, stated that as a reaction to new available data in 2013, the Cobalt Development Institute (CDI) in conjunction with the Cobalt REACH Consortium (CoRC) took the action to self-classify Co metal as a Category 1B carcinogen via inhalation.

As a consequence, under the rules of the Globally Harmonised System of Classification and Labelling of Chemicals (GHS – a UN initiative 2003), all mixtures containing > 0.1% Co metal carry the same carcinogenicity classification as pure Co.

 

Proposed cobalt reclassification raises concerns for metal powder users

Table 1 Proposal for EU classification of cobalt metal (From keynote paper: ‘Health and safety trends in hardmetal industry’ by Tuulia Svanehav, at the EuroHM Open Meeting, Reutte, 2017)

 

Svanehav stated that there is a proposal for harmonised classification of cobalt metal by the European Chemicals Agency (ECHA), as shown in Table 1. Because of the obligation to comply with the EU carcinogen and mutagen directive – the parts of proposed harmonised classification that are not in line with the current self-classification of Co metal and WC-Co mixtures – a burden is placed on industry in terms of striving towards closed production processes, where any contact with cobalt containing material is avoided, and seeking possible substitutes.

It is also expected that allowable occupational exposure limits for cobalt in inhalable form, either alone or as a mixture, will decrease substantially in the future. In 2016 a limit of 0.005 mg/m3 of Co was set in the USA, compared with 0.02 mg/m3 in 1993, and in Europe limits are expected to fall even further in the near future (Fig. 1).

 

Proposed cobalt reclassification raises concerns for metal powder users

Fig 1 Occupational exposure limit for cobalt alone or in hardmetal (from presentation by Tuulia Svanehav, EuroHM Open Meeting, Reutte, 2017)

 

Under REACH – the European Regulation on Registration, Evaluation, Authorisation and Restriction of Chemicals, which entered into force in 2007 – the responsibility for assessing and managing the risks posed by chemicals (substances), such as cobalt, has moved from public authorities to industry through registration and self-classification. As before, industry also provides appropriate safety information (Safety Data Sheets, Labelling) for users of the relevant chemicals.

News
October 18, 2017

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • Powder Metallurgy: Discover innovative technologies meeting the demands of vehicle electrification
  • Gevorkyan a.s.: Europe’s fast-growing Powder Metallurgy company achieving success through a diversified customer base
  • Powder Metallurgy in Asia: A status update from the World PM2024 Congress, Yokohama

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link