Powder Processing, Consolidation and Metallurgy of Titanium: Presentation titles now available on ipmd.net

November 9, 2011

The international conference “Powder Processing, Consolidation and Metallurgy of Titanium” takes place from 5-7 December 2011 in Brisbane, Australia. The event is set to be one of the largest ever international gatherings specifically related to powder metal titanium.

The organisers state that more than 80 papers from some 14 countries will be presented. The event is co-sponsored by five materials societies including ‘The Minerals, Metals and Materials Society’ (TMS), ‘Japan Association of Powder and Powder Metallurgy’ (JSPM), ‘Titanium Industry Development Association’ (TiDA), New Zealand, ‘Chinese Society of Metals’ (CSM), and ‘Materials Australia’ (MA).

The deadline for registration has been extended to 11 November 2011. For more details, please visit the conference website 



Presentations at the event include the following:


Information as provided by the organisers, 9 November 2011

Consolidation of NiTi Alloy Powders by Powder Compact Extrusion

Aamir Mukhtar, Warwick Downing, Peter Franz, Steve Matthews, Deliang Zhang, Fantao Kong, Christian Geipel

Microstructure and Mechanical Properties of a Press-and-Sinter Porous Ti-6Al-4V Alloy

Hailian Bi, Changzhou Yu, Peng Cao

Rare earth element: is it a necessity for PM Ti alloys?

Yong Liu, Yanbin Liu, Bin Liu, Huiping Tang

Deformation microstructure and texture in a multifunctional Ti alloy after cold swaging

Wei (Gregory) Guo, Md. Zakaria Quadir, Michael Ferry

Electron Beam Rapid Prototyping of PM Titanium Alloy

Huiping Tang, Wenpeng Jia, Xin Yang, Guangyu Yang

Fabrication and Surface Modification of Ti14Nb4Sn Alloys for Bone Tissue Engineering Applications

K. Mediaswanti, V.K. Truong, J. Hasan, C. Wen, E.P. Ivanova, C.C. Berndt, F. Malherbe, J. Wang

Structural Characteristics and Mechanical Properties of Biomedical Porous Ti-10Mo Alloy Fabricated by Selective Laser Sintering

XIE Fang-xia, LU Xin, HE Xin-bo, QU Xuan-hui

Debinding Kinetics of a Water Soluble Binder System for Titanium Alloys Metal Injection Moulding

Gang Chen, Guian Wen, Neil Edmonds, Peng Cao

Metal injection moulding of titanium and titanium-aluminides

Thomas Ebel, Orley Milagres Ferri, Wolfgang Limberg, Michael Oehring, Florian Pyczak, Frank-Peter Schimansky

High Performance Titanium Alloy Compacts by Advanced Powder Processing Techniques

Hideshi Miura, Kang Hyun Goo, Yoshinori Itoh

Direct Metal Laser Sintering of a Ti6Al4V Mandible Implant

I.A. Aziz, Brian Gabbitas, M. Stanford

Multi-Walled Carbon Nanotubes Reinforced Titanium Composites via Powder Metallurgy Process

Katsuyoshi Kondoh, Thotsaphon Threrujirapapong, Sun Bin, Hisashi Imai, Li Shufeng, Junko Umeda, Bunshi Fugetsu

Weldability of Ti-6Al-4V alloys formed via various powder consolidation techniques

Nicholas Hoye, Huijun Li, John Norrish, Rian Dippenaar

Production of Ti-6Al-4V billet through compaction of BE powders by equal-channel angular pressing

Christian Haase, Hoi Pang NG, Rimma Lapovok, Yuri Estrin

Ti-6Al-4V recycled from machining chips by equal channel angular pressing

D. T. McDonald, P. Luo, S. Palanisamy, M. S. Dargusch, K. Xia

The Effect of Laser Cladding Deposition Rate on Residual Stress Formation in Ti-6Al-4V Clad Layers

R. Cottam, K. Thorogood, Q. Lui, Y. Wong, M. Brandt

Fatigue behaviour of metal injection moulded Ti-6Al-4V after thermo-chemical treatment

Alfred T. Sidambe, Fatos Derguti, Iain Todd

Metal Injection Moulding Extra Low Interstitial Titanium

Alfred T. Sidambe, Fatos Derguti, Iain Todd

A study of polyvinyl butyryl based binder system in titanium based metal injection moulding

G. Thavanayagam, D. L. Zhang, S. Raynova, K. L. Pickering

Evaluation and Analysis of Distortion of Complex Shaped Ti-6Al-4V Compacts by Metal Injection Molding Process

S. Virdhian, T. Osada, H.G. Kang, F. Tsumori, H. Miura

Preparation, microstructure and properties of Ti-6Al-4V rods by powder compact extrusion of powder mixture

Fei Yang, Deliang Zhang, Huiyang Lu, Brian Gabbitas

Tensile Properties of Ti6Al4V Plates Produced by Open Die Powder Compact Forging of Pre-alloyed HDH Powders

Stella Raynova, Deliang Zhang, Brian Gabbitas

Fatigue resistance of a Ti-6Al-4V alloy processed by powder compact extrusion

Asma Salman, Brian Gabbitas, Deliang Zhang, Zhibo Zhang, Mingtu Jia

Resistance Heated Pressing (RHP): A novel technique for fabrication of titanium alloys

Ali Dehghan-Manshadi, Nickolas Hoye, Bob De Jong, Rian Dippenaar

Microstructure Development and Alloying Elements Diffusion during Sintering of Near-β Titanium Alloys

Elena Pereloma, Dmytro Savvakin, Andrew Carman, Azdiar Gazder, Orest Ivasishin

Fabrication of low-cost titanium materials by MIM and their property improvement by thermohydrogen processing (THP)

Xiao Pingan, Lei Bao, Liu Suhong, Zhou Wei, Zhang Xiaohu

Effect of Contaminants on Sintering of C.P. Ti and Ti-6Al-4V Pre-alloyed Powders in an Argon-Back-Filled Graphite Furnace

Changzhou Yu, Peng Cao, Mark Ian Jones

The influence of heat treatment parameters on the microstructure and properties of titanium strip produced by direct powder rolling/hot rolling densification

G. M. D. Cantin, N. A. Stone, M. A. Gibson, D. Ritchie, R. Wilson, M. Yousuff

Removal of the Water Soluble Binder Component from Titanium Green Parts Produced by MIM

Paul Ewart, Seokyoung Ahn, Deliang Zhang

Mechanical Properties of a Porous Titanium Structure Consisting of Two Different Porosities

Byounggab Lee, Jae Hyung Kim, Hyoung Seop Kim, Chong Soo Lee

Biocompatible Titanium alloys and their Scaffolding by Powder Metallurgy

Cuie Wen, Yuncang Li

Overview of Ti Corrosion

Andrej Atrens

Fundamental Reactor Design Considerations for Reducing TiCl4 Metallothermically to Produce Ti Powder

DS van Vuuren

Improvement of Ti Processing through Colloidal Techniques

R. G. Neves, J. Escribano, B. Ferrari, E. Gordo, and A.J. Sanchez-Herencia

Preparation of ultrafine Ti powder by inhibitor coated/HDH combined method

Tie-chui Yuan, Wei He, Yao Jiang, Yong Du, Yue-hui He

The History of Titanium Alloy Development

J. Williams

Australian Titanium:  From Ore to More

John E. Barnes

Application Status and Market Analysis of Non-Aero Titanium in China

Lin Zhang, Xiangdong Wang, Xuanhui Qu

Improved Titanium Powder Metal Injection Molding Using Platinum Group Metals

Hugh G.C. Hamilton, Liz Rowsell, Chris Conway, Phil Marsh, Mark A. Ashworth, Alison J. Davenport, Mark Ward, Alfred T. Sidambe, Iain Todd, Elma van der Lingen, Lesley H. Chown

VILS Activities in the Field of the Titanium Powder Metallurgy

G. Kovalev, I. Polkin

Heating and isothermal sintering characteristics of powder compacts of titanium and titanium alloys by microwave radiation

S.D. Luo, C.L. Guan, Y.F. Yang, G.B. Schaffer, M. Qian

Production of Ti-Al alloy powders using the TiPro process

Kenneth Sichone, Deliang Zhang, Stiliana Raynova, Qian Xu

Self-propagating synthesis of Ti-Al-C powder mixtures

Martin BALOG, Martin NOSKO, Roman FLOREK, Frantisek SIMANCIK, Martin WALCHER

Enhanced Sintering of Pre-alloyed Binary TiAl powder by small additions of iron

Y. Xia, G. B. Schaffer, M. Qian

Synthesis of Ti-4wt%Al-4wt%Sn-4wt%Mo-0.5wt%Si alloy by powder compact extrusion

Huiyang Lu, Deliang Zhang, Fei Yang

Biomedical Shape Memory Alloys by Powder Metallurgy

Arne Biesiekierski, James Wang, Cuie Wen

Effects of raw powder morphology and size on tensile properties of SPS-consolidated TiB/Ti composites

Akinori Ota, Masahiro Yamazaki, Hiroshi Izui

Microstructures and Tensile Properties of Pre-Sintered Ti-3Cu-1Si after Hot Deformation and Isothermal Forging

X. Wu, W. Xu, Y. F.  Yang, M. Qian, K. Xia

Deformation Processing of Ti Powder

K. Xia

Additive Manufacturing of Titanium using Electron Beam Melting (EBM)

Fred Carlstrom

Rietveld Analysis on in-situ thermal dehydrogenation of Titanium Hydride Powder

Nur Farhana Hayazi, Yu Wang, Sammy Lap Ip Chan

Effect of hot compression on the pore structure in pre-sintered pure Ti

L. Kong, X. Wu, W. Xu, T. Duong, S. Drnda, S. Luo¬, M. Qian, K. Xia

Powder Metallurgy Titanium Materials by Hydrogen Sintering

Z. Zak Fang, Pei Sun, Hongtao Wang

The Effect of Microalloying on the Sintering, Sintered Microstructure and Mechanical Property of Titanium Alloys

Y. F. Yang, S. D. Luo, G. B. Schaffer, M. Qian

Microwave Sintering of Titanium Powder for Low-Cost Processing

M. Ashraf Imam, Ralph W. Bruce, Arne W. Fliflet

Binder Systems for Titanium Injection Moulding: Development and Design

Guian Wen, Gang Chen, Peng Cao

Mechanical property and microstructure of shape memory Ti-Nb-Ag alloy for biomedical applications

Ming Wen, Cuie Wen, Peter Hodgson, Yuncang Li

Investigation on preparation of biological titanium alloy and mechanical properties

GUO Shibo, CAI Chunbo, ZHANG Yongqiang, XIAO Yong

Selective Laser Melting of Low-Modulus Ti-24Nb-4Zr-8Sn Alloy for Biomedical Applications

Lai-Chang Zhang , Timothy B. Sercombe

Titanium Powder Compact Forging and Powder Compact Extrusion: Research, Development and Industrial Applications

Deliang Zhang, Mingtu Jia, Stiliana Raynova, Fantao Kong, Fei Yang, Zhibo Zhang, Brian Gabbistas

Characteristics of powder-rolled and sintered HDH Ti sheet

N. K. Park, C. H. Lee, J. H. Kim, J. K. Hong

Effect of lubrication on the powder metallurgy processing of titanium

Jia Lou, Brian Gabbitas, Deliang Zhang

Optimisation of performance of dispersants in aqueous titanium slips

Qian Xu, Brian Gabbitas, Deliang Zhang

Preparation of Bioactive Titanium–Strontia Composite by Powder Metallurgy for Biomedical Application

Yu Wang, Cuie Wen, Peter Hodgson, Yuncang Li

A Novel Approach to Increase the High Temperature Oxidization Resistance of Titanium Alloys through Surface Treatment

Mingxing Zhang, Shoumou Miao, Yinong Shi

Titanium powder from the TiRO™ process

Christian Doblin, Andrew Chryss, Andreas Monch

TEM and XRD characterization of the α-Ti phase in as-sintered and as-cast α-Ti materials

M. Yan, S.D. Luo, G.B. Schaffer, M. Qian

Synthesis of TiC Nanoplatelet-Reinforced Ti-Matrix Composites

Qin Li, Shudong Luo, Chuanfu Wang, Kelvin Lim, Graham B. Schaffer, Ma Qian

Nano SiO2/ZrO2 Particulate-Reinforced Titanium Composites for Bone Implant Materials

Y.C. Li, C. Han, X.K. Zhu, C. Wen, P.D. Hodgson

Microstructure and mechanical properties of Ti-ZrO2 composites fabricated by spark plasma sintering

Hideaki Tsukamoto, Takahiro Kunimine, Motoko Yamada, Hisashi Sato, Yoshimi Watanabe

Processing and Properties of Commercially Pure Ti and Ti-6Al-4V Made by Two Different Powder Metallurgy Methods

W.H. Peter, R.R. Dehoff, T.R. Muth, Y. Yamamoto, W. Chen, A.S. Sabau, S.B. Gorti, J.O. Kiggans, S.D. Nunn, M.B. Clark, C.A. Blue, J. C. Williams

Modification of sintered Titanium alloys by Hot Isostatic Pressing

E. Gordo, L. Bolzoni, E.M. Ruiz-Navas, D. Zhang

Characterization and Mechanism of α2-Ti3Al and γ-TiAl precipitation in Ti-6Al-4V Alloy following Tungsten Arc Welding

L.M. Wang, H.C. Lin

Design and Development of Lower Cost High Performance Titanium Alloys – Some Basic Considerations

M. Qian, Y. F. Yang, S. D. Luo, G. B. Schaffer

Role of Surface Contamination in Titanium PM

Orest M. Ivasishin

Fundamental Aspects of the Sintering of High-Strength Titanium Alloys from Elemental Powder Blends

Orest M. Ivasishin

PM Titanium: From low cost to high performance

E. Gordo, L. Bolzoni, P.G. Esteban, E.M. Ruiz-Navas, D. Zhang

Metal injection moulding of porous titanium using lower cost hydrogenated-and-dehydrogenated titanium powder

P. Yu, S. D. Luo, G.B. Schaffer, M. Qian

Microwave fabrication of titanium hollow spheres with tailored shell structures

P. Yu, Günter Stephani, S. D. Luo, M. Qian

A Novel Process for Making Spherical Powders of High Nb Containing TiAl Alloys

LU Xin,  ZHU Lang-ping,  QU Xuan-hui

Effect of O and Fe on phase transformations in CP Ti alloys: A case study in laser welding

Alex Buddery

Comparison of blended elemental (BE) and mechanical alloyed (MA) powder compact forging into Ti-6Al-4V rocker arms

Mingtu Jia, Deliang Zhang and Brian Gabbitas

Recent developments in understanding the role of thermal and contact conditions during machining of titanium alloys

Matthew Dargusch

Review of Titanium Research in Australia from the Turn of 21st Century – An Update

Suresh Palanisamy

Panel Discussion on The Future of PM Ti

To be chaired by Dr David Whittaker, Chair of the International Liaison Committee of International Journal of Powder Metallurgy, APMI.


For full event information and registration, visit the event website: 

www.materialsaustralia.com.au/scripts/cgiip.exe/WService=MA/ccms.r?pageid=20238
 

News | Articles | Market reviews | Search directory | Subscribe to e-newsletter

 

www.ipmd.net

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • Burgess-Norton and Amsted Automotive: How a legacy automotive supplier is growing with, not despite, electrification
  • Meeting sustainability demands in PM: High-temperature sintering of nickel- and copper-free powder mixtures for low alloyed PM parts
  • World PM2022: An overview of the status and trends in the global PM industry
  • A novel approach for the production of metal powders with tailored chemical compositions: Amazemet’s rePowder
  • Productivity, flexibility, reliability: SACMI’s new press technologies for the changing PM industry
  • Understanding the thermal properties of metal powders: Characterisation of powders using the Hot Disk technique
  • World PM2022: Views on the potential of Field Assisted Sintering for advanced materials

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

From the industry…

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
Download PDF
Share via
Copy link