• MAPP 2^nd International Conference to take place in June

  Following on from the success of its 2018 event, MAPP (Manufacturing using Advanced Powder Processes), the EPSRC Future Manufacturing Hub led by th...»

• Sandvik reports record twelve months

  Sandvik AB, headquartered in Stockholm, Sweden, has reported its results for its full-year 2019. The company stated that 2019 had been a record twe...»

• Alvier AG PM-Technology appoints Thomas Bühler as its new CEO

  Alvier AG PM-Technology, a Swiss-based Powder Metallurgy tooling manufacturer acquired by Sweden’s Höganäs AB in 2018, has appointed Thomas Bü...»

• Isostatic Toll Services opens new HIP facility in Spain

  Isostatic Toll Services Bilbao SL, is set to officially open its new Hot Isostatic Pressing facility on 29th January, 2020, in Abanto Zierbena, Bis...»

• Particle Testing Authority launches testing service for Additive Manufacturing powders

  Particle Testing Authority (PTA), a division of Micromeritics Instrument Corporation, headquartered in Norcross, Georgia, USA, reports that it has ...»

• Grupo Mess named Mexican distributor for Buehler metallography solutions

  Buehler, an ITW Company headquartered in Lake Bluff, Illinois, USA, has entered into a partnership with Mess Servicios Metrologicos S. de R.L. de C...»

• Ricoh’s new resin-coated powders aim to expand range of metals for Binder Jetting

  The Additive Manufacturing Business Group of Ricoh, based in Kanagawa, Japan, has developed a new resin-coated metal powder and cross-linking ‘in...»

• Stack Metallurgical Group expands heat treating capabilities with new Ipsen furnace

  Ipsen USA, Cherry Valley, Illinois, USA, has installed a TITAN® vacuum furnace for Stack Metallurgical Group, Portland, Oregon, USA, at its locati...»

• MAPP 2^nd International Conference to take place in June

  Following on from the success of its 2018 event, MAPP (Manufacturing using Advanced Powder Processes), the EPSRC Future Manufacturing Hub led by the University of Sheffield»

• Sandvik reports record twelve months

  Sandvik AB, headquartered in Stockholm, Sweden, has reported its results for its full-year 2019. The company stated that 2019 had been a record twelve months for order intake»

• Alvier AG PM-Technology appoints Thomas Bühler as its new CEO

  Alvier AG PM-Technology, a Swiss-based Powder Metallurgy tooling manufacturer acquired by Sweden’s Höganäs AB in 2018, has appointed Thomas Bühler as its new CEO effective»

• Isostatic Toll Services opens new HIP facility in Spain

  Isostatic Toll Services Bilbao SL, is set to officially open its new Hot Isostatic Pressing facility on 29th January, 2020, in Abanto Zierbena, Biscay, Spain. With a total investment of €14 milli...»

Powder Metallurgy components are relied upon by a wide variety of manufacturing industries, from automotive to power tools, household appliances, chemical engineering, filtration and more.

The main reason for the technology’s success is its cost-effectiveness at producing high volumes of net-shape components, combined with its ability to allow the manufacture of products that, because of the production processes, simply cannot be manufactured by other methods.

To discover more about how the technology has revolutionised component production, browse our Introduction to Powder Metallurgy.

• Discover more

• MAPP 2^nd International Conference to take place in June

  Following on from the success of its 2018 event, MAPP (Manufacturing using Advanced Powder Processes), the EPSRC Future Manufacturing Hub led by th...»

• Sandvik reports record twelve months

  Sandvik AB, headquartered in Stockholm, Sweden, has reported its results for its full-year 2019. The company stated that 2019 had been a record twe...»

• Alvier AG PM-Technology appoints Thomas Bühler as its new CEO

  Alvier AG PM-Technology, a Swiss-based Powder Metallurgy tooling manufacturer acquired by Sweden’s Höganäs AB in 2018, has appointed Thomas Bü...»

• Isostatic Toll Services opens new HIP facility in Spain

  Isostatic Toll Services Bilbao SL, is set to officially open its new Hot Isostatic Pressing facility on 29th January, 2020, in Abanto Zierbena, Bis...»

• Particle Testing Authority launches testing service for Additive Manufacturing powders

  Particle Testing Authority (PTA), a division of Micromeritics Instrument Corporation, headquartered in Norcross, Georgia, USA, reports that it has ...»

• Grupo Mess named Mexican distributor for Buehler metallography solutions

  Buehler, an ITW Company headquartered in Lake Bluff, Illinois, USA, has entered into a partnership with Mess Servicios Metrologicos S. de R.L. de C...»

• Ricoh’s new resin-coated powders aim to expand range of metals for Binder Jetting

  The Additive Manufacturing Business Group of Ricoh, based in Kanagawa, Japan, has developed a new resin-coated metal powder and cross-linking ‘in...»

• Stack Metallurgical Group expands heat treating capabilities with new Ipsen furnace

  Ipsen USA, Cherry Valley, Illinois, USA, has installed a TITAN® vacuum furnace for Stack Metallurgical Group, Portland, Oregon, USA, at its locati...»