Powder Metallurgy Review, Summer 2014, Vol. 3 No. 2

 

Prefer a PDF download? Click here

 

In addition to more than 30 pages of news from the Powder Metallurgy industry, the 88 page Summer 2014 issue of Powder Metallurgy Review magazine (Vol. 3 No. 2) includes the following articles and special features:

 

Additive Manufacturing with metal powders: Design for Manufacture evolves into Design for Function

Additive Manufacturing offers the possibility to produce complex parts without the design constraints of traditional manufacturing routes. Components that would not have even been possible just a few years ago can now be made to high standards using a wide range of metal powders. No longer solely a prototyping technology, Additive Manufacturing is now being used for the production of series components for the most demanding applications. Juan F Isaza P and Claus Aumund-Kopp review the various processes in use as well as key application areas and present an outlook for a technology that is set to revolutionise the future use of metal powders.

View online | Download Single Page PDF | Download Double Page PDF

 

Titanium PM 2013 Conference: The impact of impurities, advances in porous titanium and titanium Additive Manufacturing

The second International Titanium Powder Processing, Consolidation and Metallurgy Conference, PM Titanium 2013, took place in Hamilton, New Zealand, from December 2-4 2013. The event attracted over 80 participants from around the world to discuss the latest advances in the field of titanium Powder Metallurgy. Prof Ma Qian of RMIT University (Royal Melbourne Institute of Technology) reports on selected highlights from the conference on behalf of Powder Metallurgy Review.

View online | Download Single Page PDF | Download Double Page PDF

 

Vacuum sintering and Low Pressure Carburising of PM components

In order to improve the efficiency of the sintering and heat treatment of PM alloys for high load bearing applications such as PM transmission gears, France’s ECM Technologies has developed an innovative new combined batch vacuum sintering and Low Pressure Carburising furnace. The system enables the complete thermal treatment of PM components in one step, as well as optimising the quenching and case hardening processes. ECM’s Hubert Mulin, Yves Giraud and Jean-Jacques Since and Höganäs AB’s Mats Larsson report for Powder Metallurgy Review.

View online | Download Single Page PDF | Download Double Page PDF

 

Non-ferrous powder production: Manufacturing methods and properties of copper, aluminium, titanium and nickel powders

This extensive 23 page review of key non-ferrous powders used in the Powder Metallurgy industry focuses on the production and properties of copper, aluminium, titanium and nickel powder. Professor Oleg Neikov, from the Institute for Problems of Materials Science in Kiev, Ukraine, identifies the methods available for manufacturing these powders including detailed descriptions of the atomisation process, mechanical grinding, and electrochemical methods. A number of key powder properties are also listed.

View online | Download Single Page PDF | Download Double Page PDF

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • From powder modification to rejuvenation: Fluidised Bed Reactors in metal powder production and Additive Manufacturing
  • Retech: Enabling the atomisation of reactive and refractory alloys at substantially higher levels of productivity and lower cost
  • Sustainability in Powder Metallurgy: Highlights from the 41st Hagen Symposium
  • Innovations from Japan’s Powder Metallurgy industry: award winners highlight novel automotive and healthcare applications

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link