EPMA Excellence in Powder Metallurgy Awards 2010

Winners of the EPMA’s 2010 Excellence in Powder Metallurgy Awards were announced at the 2010 PM World Congress in Florence, Italy.

The winning entries once again highlighted the capabilities of powder metallurgy and demonstrated the continuing advancements in the PM industry.

The competition, which was open to all EPMA member companies, covered components, materials and process equipment. Awards were presented by the EPMA’s president, Mr Ingo Cremer, during the opening ceremony.

< See award archive

 

Process Equipment Category

This category included entries from Arburg GmbH, Dorst Technologies GmbH, Osterwalder AG, Promet and the State Research and Production Association of the Belarusian National Technical University.

 

Dorst Technologies – Electrical Servo Drive Press EP30

EPMA Excellence in Powder Metallurgy Awards 2010

Dorst Technologies GmbH, Germany, received an award for the development of their Electrical Servo Drive Compacting Press.

Each of the presses main axes incorporates an individual, independently operated servo drive (upper ram, lower ram, filler drive and core rod), as do all the platens of the die set. The low inertia of the drives permits a highly dynamic motion control for fast and precise movements.

The new press is available as a single or multi-platen version for pressing forces ranging from 150 to 1200 kN and demonstrates the opportunities that electrical drive technology represents.

www.dorst.de

 

Osterwalder AG – Servo-electric Powder Compacting Press CA-SP 160 Electric

EPMA Excellence in Powder Metallurgy Awards 2010

Osterwalder AG, Switzerland, also received an award for a fully servo-electric powder-compacting press.

Using the ‘Direct Drive Technology’ for all drives eliminates the need for secondary drive elements such as gears and belts. This leads to improved reliability and high dynamic control due to the low inertia of the drives.

The press provides a compacting force of 160kN in withdrawal configuration and provides a number of advantages over hydraulic versions, such as reduced energy consumption, lower noise levels, reduced maintenance and improved accuracy.

www.osterwalder.com

 

Materials Category

With entries from Hoeganaes Corp, Höganäs AB, Pometon SpA and the State Research and Production Association of the Belarusian National Technical University, this category highlighted developments in materials technology.

 

Höganäs AB – Distaloy® AQ

EPMA Excellence in Powder Metallurgy Awards 2010

An award for their Distaloy AQ powder was presented to Höganäs AB of Sweden.

The powder is designed to have excellent machinability and sizing properties in the sintered state, with high strength and hardness after heat treatment. Distaloy AQ includes around 1% (0.5% Ni and 0.5% Mo nominal composition) of alloying elements which help to make the powder less sensitive to market price fluctuations.

The development of Distaloy AQ was a good example of how customers’ needs were translated into solutions that benefit component manufacturers as well as OEMs and thus help to improve the competitiveness of PM versus competing manufacturing technologies.

www.hoganas.com

 

Pometon SpA – Ecosint

EPMA Excellence in Powder Metallurgy Awards 2010

Pometon S.p.A, Italy, also won an award in the Materials Category for their Ecosint powder range.

A group of new high strength and cost effective PM steels has been generated by mixing selected combinations of alloying elements (e.g. Cr, Mo, Ni, Cu, Mn) in different and predetermined concentrations. The main purpose was to achieve an optimum balance between compressibility, hardenability and other sintered properties.

This material is the first to use all these elements together, adequately combining them and thus taking full advantage of the multiple interactions among its constituents. This allows high performance PM steels with minimum alloying content for sinter-hardening grades.

View more on the Ecosint powder on www.ipmd.net here

 

Component Category

A total of 14 entries were received in the Component Category of the 2010 EPMA awards. From a wide range of components ranging from automotive applications to photographic accessories, the following two products were chosen to receive awards.

 

OBE Ohnmacht & Baumgaertner GmbH – MIM locking device for spectacles

EPMA Excellence in Powder Metallurgy Awards 2010

This extremely small locking device for spring hinges in spectacles resulted in an award for OBE, Germany.

Due to the high quantity needed per year, metal injection moulding (MIM) proved the most cost effective technology in order to keep the whole spring hinge component at a competitive price level.

The locking device is the most sensitive component of the spring hinge and the high abrasion during its function makes it necessary to use a hard and also non corrosive material. The component  utilises the high precision available using the MIM process and weighs just 0.028g. Around 4 million parts per year are produced using 32 cavity moulds.

www.obe.de

 

SHW Automotive – Aluminium Rotor and Sprocket

EPMA Excellence in Powder Metallurgy Awards 2010

The second award in the Component Category was given to SHW Automotive, Germany, for the development of their aluminium sprocket and rotor.

The rotor and sprocket are used in an automotive cam-phaser application and are the first known   components being manufactured from aluminium powder in large scale production.

Compared to a standard sintered iron cam-phaser design, weight is reduced from 900 grams to 450 grams. In addition to fuel savings due to reduced weight, the rotating inertias are also reduced which improves the dynamic response behaviour of the cam-phaser, thus giving another benefit to engine performance and efficiency.

Stimulated by the continuous need for CO2/fuel savings following legislative regulations, growing usage of aluminium powder metal components in automotive applications is expected.

www.shw.de

 

View past award winners from MPIF, JPMA and EPMA in our awards archive

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • From powder modification to rejuvenation: Fluidised Bed Reactors in metal powder production and Additive Manufacturing
  • Retech: Enabling the atomisation of reactive and refractory alloys at substantially higher levels of productivity and lower cost
  • Sustainability in Powder Metallurgy: Highlights from the 41st Hagen Symposium
  • Innovations from Japan’s Powder Metallurgy industry: award winners highlight novel automotive and healthcare applications

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link