MPIF announces Special Technologies Category winners in 2020 PM Design Excellence Awards

July 25, 2020

The Metal Powder Industries Federation (MPIF) has announced the winners in the Special Technologies Category of its 2020 Powder Metallurgy Design Excellence Awards.

The Special Technologies Category awards prizes to parts made using ’special’ Powder Metallurgy technologies such as Metal Injection Moulding (MIM) and metal Additive Manufacturing. 


Grand prizes

Special Technologies–Aerospace/Military/Firearms Category for MIM

The grand prize in this category was awarded to Advanced Powder Products Inc. for a trigger mechanism housing for a new 9 mm sub-compact pistol produced for O.F. Mossberg & Sons Inc. 

The component originally comprised two pieces (metal and plastic), and was redesigned as a single MIM part. Over 5,000 rounds were fired to test the part and no failures were observed.

Special Technologies–Medical/Dental Category for MIM

Advanced Powder Products Inc. also received a grand prize in this category for a guide tube used in dental surgery. 

This extremely small part has very thin wall sections and a built-in impingement plate on the inner diameter of the tip. This impingement plate has a Gaussian curvature that can only be formed economically by Metal Injection Moulding.

Awards of distinction

Special Technologies–Aerospace/Military/Firearms Category for MIM

An Award of Distinction was given in this category to Alpha Precision Group – Metal Injection Moulding for a shroud that houses the firing pin and firing pin collar in a bolt-action rifle.

A further Award of Distinction was given in this category to ARC Group Worldwide for lever actuators for vanes in a turbo-prop engine. The actuators control the angle of the variable inlet guide vanes and the variable stator vanes.

Special Technologies–Aerospace/Military/Firearms Category for Metal AM

An Award of Distinction was given to 3DEO in this category for an anchor link used in a firearms application. A hybrid metal AM process is used to make the parts.

Special Technologies–Medical/Dental Category for MIM

In this category, an Award of Distinction was given to MPP and its customer Coracoid for a buckle used in an implanted shoulder repair device. 

Several technologies were considered for making the part but MIM processing was the only one that produced a part that could withstand the stresses induced during the cinching of the device during surgery and the placement of the cleat.

A second award was given in this category to OptiMIM and its customer Atricure for one of two jaws of a surgical device for deploying a clip around a heart’s left-atrial-appendage. The mould produces two parts that are mirror images of one another.

Special Technologies–Electronic/Electrical Components Category for MIM

An Award of Distinction was given to ARC Group Worldwide and its customer Cutsforth Inc. in this category for a lower beam EZ change holder for removable brush holders. 

These parts are used in brush excitation maintenance on turbine generators in the nuclear, gas, coal, wind and hydro industries.

www.mpif.org 

Latest Industry News

Download the latest issue of PM Review

Our latest issue is now available to download in PDF format, free of charge.

As well as an extensive Powder Metallurgy industry news section, this 88-page issue includes the following exclusive articles and reports:

  • Are you safe or lucky? A look at Environment, Health and Safety in the PM industry
  • The hybridisation of pick-up trucks and the impact on the content of PM parts
  • EPMA’s General Assembly reviews Powder Metallurgy trends in Europe
  • Metal powder recycling: Innovative technology is turning waste into resources
  • More information

Industry News

E-newsletter

Sign up to our free e-newsletter, sent weekly to industry professionals around the world. We'll also let you know each time a new issue of PM Review magazine is available.

Subscribe for a FREE digital magazine

PM Review is the leading international magazine for the Powder Metallurgy industry.
Published four times a year, it is available as a free download or through a print subscription

Connect with us

Powder Metallurgy: The original net-shape production process

Powder Metallurgy components are relied upon by a wide variety of manufacturing industries, from automotive to power tools, household appliances, chemical engineering, filtration and more.

The main reason for the technology’s success is its cost-effectiveness at producing high volumes of net-shape components, combined with its ability to allow the manufacture of products that, because of the production processes, simply cannot be manufactured by other methods.

To discover more about how the technology has revolutionised component production, browse our Introduction to Powder Metallurgy.

Latest industry news

Copy link
Powered by Social Snap