Malvern Panalytical to hold webinar on X-ray diffraction for metal Additive Manufacturing

October 26, 2020

Malvern Panalytical, a supplier of analytical instrumentation and automation solutions provider, and part of Spectris plc, Egham, Surrey, UK, will hold a webinar titled ‘Additive Manufacturing of metal alloys: Why XRD is an important tool for characterizing metal powders and built components’ in November.

For metal fabrication processes such as casting, forging, and isostatic pressing, the heating-cooling regimes are more prolonged, controlled and homogeneous. However, for powder bed-based Additive Manufacturing processes such as Powder Bed Fusion (PBF), the heating-cooling regimes are rapid and location-specific.

This can lead to different microstructures than those obtained with conventional processes, even with the same alloy composition. Microstructures can change further with post-treatments such as heating, machining and isostatic pressing.

X-ray diffraction (XRD) is a non-destructive analytical technique that can be used to study these processes by measuring microstructural characteristics such as phase composition, crystallite size, texture (crystallite orientation), and residual stress/strain.

During the webinar, Dr Scott Speakman will discuss how XRD can be used to study and optimise the AM process, including through powder and component analysis, and present several application examples.

The webinar will be held live on November 19, 2020, from 10:30–11:30 AM (EST). Registration is available via the event website.

www.malvernpanalytical.com

Latest Industry News

Download the latest issue of PM Review

Our latest issue is now available to download in PDF format, free of charge.

As well as an extensive Powder Metallurgy industry news section, this 92-page issue includes the following exclusive articles and reports:

  • The MPIF reflects on the state of the North American Powder Metallurgy industry in 2020
  • Next-level defect detection with advanced Acoustic Resonance Inspection
  • A fully-integrated automated production cell for increased PM productivity
  • MPIF Powder Metallurgy Design Excellence Awards showcase range of demanding applications
  • The micro-ingot route: A variant of the PM process that could offer new opportunities for the PM industry
  • More information

Industry News

E-newsletter

Sign up to our free e-newsletter, sent weekly to industry professionals around the world. We'll also let you know each time a new issue of PM Review magazine is available.

Subscribe for a FREE digital magazine

PM Review is the leading international magazine for the Powder Metallurgy industry.
Published four times a year, it is available as a free download or through a print subscription

Connect with us

Powder Metallurgy: The original net-shape production process

Powder Metallurgy components are relied upon by a wide variety of manufacturing industries, from automotive to power tools, household appliances, chemical engineering, filtration and more.

The main reason for the technology’s success is its cost-effectiveness at producing high volumes of net-shape components, combined with its ability to allow the manufacture of products that, because of the production processes, simply cannot be manufactured by other methods.

To discover more about how the technology has revolutionised component production, browse our Introduction to Powder Metallurgy.

Latest industry news

Copy link
Powered by Social Snap