Höganäs joins DESULF project to reuse zinc-rich dust from its melting furnaces

April 6, 2021

The DESULF project aims to reduce the need for virgin zinc by operating circular streams for byproducts resulting in zinc (Courtesy VTT)

Zinc-rich dust is a significant by-product of Höganäs’ melting furnace in Sweden, with limited potential for reuse. However, the metal powder producer states that this could now change, following its collaboration with an ongoing project with a leading research institute that is reported to have already found a solution with clear environmental benefits.

Höganäs has joined the DESULF project, coordinated by the VTT Technical Research Centre of Finland, which aims to reduce the need for virgin zinc. Supported by funding from the EU’s consortium, EIT Raw Materials, the project is planned to run through the end of 2022 and includes partners in the metal industry and gas purification sector.

“We handle a lot of different dusts at Höganäs that go back into our processes or are sent for external metal recovery,” stated Björn Haase, Manager Non-Metal Products at Höganäs. “But we are always looking for new ways to increase the circularity of our dust side streams and reduce the use of virgin materials in any way we can.”

On a small scale, the DESULF project has already shown that side streams containing zinc originating in steel production can be used to remove sulphur from gases almost as efficiently as current commercial zinc oxide products. Its objective is to stimulate new business activity by upscaling the process to an industrial scale.

Haase further explained, “It would mean that material from Höganäs could help to lower environmental impact – not only by increasing the circularity of the zinc-rich dust side stream from its melting furnace in Sweden, but also by reducing the need for virgin zinc and the treatment of zinc-containing dust as hazardous waste.”

Höganäs’ Swedish plant currently sends its zinc-rich dust to a high-tech metal company, where the zinc is recovered and used to dilute virgin zinc. This company is also involved in the DESULF project and Höganäs’ close relationship with them will not change – it will simply supply the dust for another use before it is sent for recovery. This agreement offers other environmental advantages as it effectively doubles the use of this side stream and, again, helps to reduce the need for zinc ore.

The DESULF project also recognises that there is an increasing demand for this kind of circular solution: in the future, an estimated 5,000 tonnes of zinc oxide will be needed in Finland alone to purify synthetic gas which can be used to produce renewable transport fuels and chemicals.

“VTT has already found a network of companies that would be interested in zinc-rich dust by products,” Haase concluded. “This is an important and exciting project that I am happy to be a part of, and I am very confident it will be a success.”



Latest Industry News

Download the latest issue of PM Review

Our latest issue is now available to download in PDF format, free of charge.

As well as an extensive Powder Metallurgy industry news section, this 120-page issue includes the following exclusive articles and reports:

  • Tesla teardown: Identifying potential uses for PM in electric vehicle transmissions
  • Can European research still claim to be ‘world class’? Prof José M Torralba on the changed PM research base
  • How to make metal powders. Part 1: An introduction to atomisation, process fundamentals and powder characteristics
  • Starting out in powder production: The story of Fomas Group’s Mimete metal powder business
  • The creation of a Powder Metallurgy market leader: China’s NBTM New Materials Group Co., Ltd.
  • Tungsten heavy alloys: An exploration of how key property combinations enable better mechanical performance
  • Pharmaceuticals and PM are closer than you think: A new approach to understanding powder compaction and tablet characterisation
  • More information

Industry News


Sign up to our free e-newsletter, sent weekly to industry professionals around the world. We'll also let you know each time a new issue of PM Review magazine is available.

Subscribe for a FREE digital magazine

PM Review is the leading international magazine for the Powder Metallurgy industry.
Published four times a year, it is available as a free download or through a print subscription

Connect with us

Powder Metallurgy: The original net-shape production process

Powder Metallurgy components are relied upon by a wide variety of manufacturing industries, from automotive to power tools, household appliances, chemical engineering, filtration and more.

The main reason for the technology’s success is its cost-effectiveness at producing high volumes of net-shape components, combined with its ability to allow the manufacture of products that, because of the production processes, simply cannot be manufactured by other methods.

To discover more about how the technology has revolutionised component production, browse our Introduction to Powder Metallurgy.

Latest industry news

Copy link