Mixing Powders for PM Processing

The mixing, or blending, of powder feedstocks for die pressing of Powder Metallurgy parts is carried out for two reasons:

To introduce alloying element additions in a homogeneous form

Die pressing feedstocks generally consist of elemental mixes in order to maintain as high a level of compressibility as possible. Using this approach means that the compressibility is controlled by that of the soft, annealed base powder (most commonly iron). Use of a fully pre-alloyed powder would mean that the initial particle hardness and work hardening rate would both be increased by the alloying additions and compressibility therefore reduced.

THE WORLD OF POWDER METALLURGY TO YOUR INBOX
Subscribe to our weekly newsletter
Sign up

To incorporate a pressing lubricant

Popular lubricants are stearic acid, stearin, metallic stearates or other organic compound of a waxy nature. The purposes of adding the lubricant are to reduce friction (and therefore even out density variations) during compaction, to reduce ejection forces and to minimise the tendency for ejection cracking in the compact.

A homogeneous mix is generally produced from the initial constituents by a tumbling action in an appropriate mixing vessel. Mixing vessels are often of a double-cone geometry, but other vessel shapes are also utilised (V, W or Y-shaped sections).

In the special case of cemented carbide materials, mixing is carried out in a ball mill, in order to coat the individual carbide particles with the binder metal (e.g. cobalt). As the very fine powder particles involved have poor flow characteristics, the mixture is subsequently granulated to form agglomerates.

Next page: Forming | Contents page

Download PM Review magazine

In the latest issue of PM Review…

Download PDF

Extensive Powder Metallurgy industry news coverage, and the following exclusive deep-dive articles and reports:

  • From powder modification to rejuvenation: Fluidised Bed Reactors in metal powder production and Additive Manufacturing
  • Retech: Enabling the atomisation of reactive and refractory alloys at substantially higher levels of productivity and lower cost
  • Sustainability in Powder Metallurgy: Highlights from the 41st Hagen Symposium
  • Innovations from Japan’s Powder Metallurgy industry: award winners highlight novel automotive and healthcare applications

The latest news from the world of metal powders, delivered to your inbox

Don't miss any new issue of PM Review, and get the latest industry news. Sign up to our weekly newsletter.

Sign up

Join our community

Discover our magazine archive…

The free-to-access PM Review magazine archive offers unparalleled insight into the world of Powder Metallurgy from a commercial and technological perspective through:

  • Reports on visits to leading PM part manufacturers, metal powder manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

 

Browse the archive

 

Looking for PM production equipment, metal powders, R&D support and more?

Discover suppliers of these and more in our
advertisers’ index and buyer’s guide, available in the back of PM Review magazine.

  • Powders & materials
  • Powder process, classification & analysis
  • PM products
  • Atomisers & powder production technology
  • Compaction presses, tooling & ancillaries
  • Sintering equipment & ancillaries
  • Post-processing
  • Consulting & toll sintering
View online
Share via
Copy link